Company news
You are here: Home > News > Company news
SUNKON Glass edging machine working principle and installation requirements
Announcer:Chengang Release time:2019-5-8 14:01:49
working principle
The glass edging machine mainly realizes the grinding and polishing of the glass by the grinding head motor and the grinding wheel, and the ordinary unilateral/bilateral edging machine can realize the rough grinding, the fine grinding and the polishing once. Customers can choose different grinding wheels according to their processing requirements.
Installation requirements
The installation of the glass edging machine needs to ensure that the ground is level. After installation, the angle of each angle of the machine should be guaranteed, otherwise the processing effect will be affected. Ensure that the power is correct, such as foreign special industrial voltage 415V/50HZ, 220V/50HZ, 220/60HZ. If the power is wrong, it may cause the motor on the edging machine or the electrical equipment in the electric cabinet to burn out (the factory in some countries has no Leakage protection switch). The glass edging machine works under the condition of water supply, and the customer should judge whether the water supply amount of the floor water tank of the factory is sufficient according to the processing amount of the factory.
The glass edging machine mainly realizes the grinding and polishing of the glass by the grinding head motor and the grinding wheel, and the ordinary unilateral/bilateral edging machine can realize the rough grinding, the fine grinding and the polishing once. Customers can choose different grinding wheels according to their processing requirements.
Installation requirements
The installation of the glass edging machine needs to ensure that the ground is level. After installation, the angle of each angle of the machine should be guaranteed, otherwise the processing effect will be affected. Ensure that the power is correct, such as foreign special industrial voltage 415V/50HZ, 220V/50HZ, 220/60HZ. If the power is wrong, it may cause the motor on the edging machine or the electrical equipment in the electric cabinet to burn out (the factory in some countries has no Leakage protection switch). The glass edging machine works under the condition of water supply, and the customer should judge whether the water supply amount of the floor water tank of the factory is sufficient according to the processing amount of the factory.